This beautiful little board for ATMega128 development was made by Olimex, and provides lots of I/O to help get your project running quickly. There are detailed specs at this Olimex page, including links to PDF manuals, demo code, schematics, and a complete open-source weather station. We only have one of these for sale; our new research vessel has standardized on the Arduino platform, so this is no longer needed. It has been tested with the supplied demo code, but never been fully in use.
FEATURES:
- MCU: ATMega128-16AI with128K Bytes Program Flash, 4K Bytes data EEPROM, 4K Bytes RAM
- JTAG connector for in-circuit programming and debugging with AVR-JTAG
- ICSP 5x2 (10) pin STKxxx compatible connector for in-circuit programming with AVR-PG1B or AVR-PG2B
- RS232 connector with TTL levels
- RS232 interface circuit with Tx, Rx signals
- RS232 DB9 female connector
- Dallas touch button port
- Frequency input
- LCD 16x2 display
- LED status
- five buttons
- Buzzer
- power supply circuit +5V, 78L05 with plug-in power jack and diode bridge
- 32 768 Hz oscillator crystal
- 16 Mhz crystall oscillator
- power supply filtering capacitor
- RESET supervisor IC ZM33064
- RELAY with 10A/250VAC NO and NC contacts with screw terminals
- extension headers for unused in the schematic ports available for external connection
- PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
- four mounting holes 3.3 mm (0.13")
- Dimensions: 120x38 mm (4.7x1.5")
